|
|
|
|
Specification |
|
E3 |
|
Description |
|
Old thick steel scrap, predominantly more than 6 mm thick in sizes not exceeding 1,5x0,5x0,5 m, prepared in a manner to ensure direct charging. May include tubes and hollow sections.Excludes vehicle body scrap and wheels from light vehicles. Must be free of rebars and merchant bars, free of metallic copper, tin, lead (and alloys), mechanical pieces and steriles to meet the aimed analytical contents. |
|
Dimensions |
|
Thickness 6 mm Dimension 1,5x0,5x5 m |
|
Density(t/m³) |
|
0,6 |
|
Steriles* |
|
1% |
|
|
Specification |
|
E1 |
|
Description |
|
Old thin steel scrap predominantly less than 6 mm thick in sizes not exceeding 1,5x0,5x0,5 m prepared in a manner to ensure direct charging. If greater density is required it is recommended that maximum 1 metre is specified.May include light vehicle wheels, but must exclude vehicle body scrap and domestic appliances. Must be free of rebars and merchant bars, free of metallic copper, tin, lead (and alloys), mechanical pieces and steriles to meet the aimed analytical contents. |
|
Dimensions |
|
Thickness < 6 mm Dimension 1,5x0,5x0,5 m |
|
Density(t/m³) |
|
0,5 |
|
Steriles* |
|
< 1,5% |
|
|
* Corresponds to the weight of steriles, not adhering to the scrap, remaining at the bottom of the vehicle after unloading by magnet. |
|
|
|
|
|
|
|
|
|
|
|
|
|