|
|
|
|
Specification |
|
E40 |
|
Description |
|
Shredded steel scrap. Old steel scrap fragmentized into pieces not exceeding 200 mm in any direction for 95% of the load. No piece, in the remaining 5%, shall exceed 1000 mm. Should be prepared in a manner to ensure direct charging. The scrap shall be free of excessive moisture, loose cast iron and incinerator material (especially tin cans).Must be free of metallic copper, tin, lead (and alloys) and steriles to meet the aimed analytical contents. |
|
Dimensions |
|
|
|
Density(t/m³) |
|
> 0,9 |
|
Steriles* |
|
< 0,4% |
|
|
Specification |
|
E46 |
|
Description |
|
Fragmentized incinerator scrap. Loose steel scrap processed through an incinerating plant for household waste followed by magnetic separation, fragmentized into pieces not exceeding 200 mm in any direction and consisting partly of tin coated steel cans. Should be prepared in a manner to ensure direct charging. The scrap shall be free of excessive moisture and rust. Must be free of excessive metallic copper, tin, lead (and alloys) and steriles to meet the aimed analytical contents. |
|
Dimensions |
|
|
|
Density(t/m³) |
|
0,8 |
|
Steriles* |
|
FE content 92% |
|
|
* Corresponds to the weight of steriles, not adhering to the scrap, remaining at the bottom of the vehicle after unloading by magnet. |
|
|
|
|
|
|
|
|
|
|
|
|
|